Floor Distribution Duct - Installation

INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

PASSENGER FRONT FLOOR DUCT





1. Connect the passenger front floor duct (1) to the passenger side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the glove box binInstrument Panel Glove Box - Installation.

DRIVER FRONT FLOOR DUCT

NOTE: Illustration shown with instrument panel removed for clarity.





1. Connect the driver front floor duct (1) to the driver side HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the instrument panel Instrument Panel - Installation.

REAR FLOOR DISTRIBUTION DUCTS





1. Connect the left rear floor distribution duct (1) and the right rear floor distribution duct (2) as required to the HVAC housing (3). Make sure the ducts are fully engaged to the housing.
2. Install the rear seat floor ducts.
3. Install the instrument panel Instrument Panel - Installation.

REAR SEAT FLOOR DUCTS

NOTE: Passenger side rear floor duct shown. Driver side duct similar.





1. Connect the rear seat floor duct (2) to the rear floor distribution duct (3). Make sure the ducts are fully engaged to each other.
2. Engage the retainer that secures the rear seat floor duct to the floor support (4) and install the retaining screw (1). Tighten the screw to 2.2 Nm (20 in. lbs.).
3. Reinstall the carpet Carpet - Installation.
4. Install the front seat to the side of the vehicle being serviced Seat - Installation.
5. Install the center floor console Floor Console - Installation.