Front

INSTALLATION

1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. For appropriate seat configuration illustrations, Front Seat - Description.




3. Position the seat back cover over the seat back frame.
4. Position the seat back cushion on the frame and position the cover over the cushion.
5. Attach the seat cover (3) to the seat back cushion (1) and install new hog rings.





6. On vehicles equipped with a seat airbag, install the airbag, Seat Air Bag - Installation.
7. Zip the rear cover zippers and connect the J-straps (1 AND 2).





8. Position the headrest sleeves (2) and seat into the seat back (1) frame fully.

9. Position the seat back onto the seat cushion assembly and connect the electrical connectors if equipped.
10. Install the seat back assembly bolts and tighten to 47 Nm (34.5 ft. lbs.).
11. Connect the electrical connectors, if equipped.
12. Install the front seat, Front Seat - Installation