Horn Switch - Removal

REMOVAL

WARNING:
- On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.
- The horn switch is integral to the driver side airbag module. Service of this component should be performed only by Chrysler trained and authorized dealer service technicians. Failure to take the proper precautions or to follow the proper procedures could result in accidental, incomplete, or improper airbag deployment and possible occupant injuries.





1. Disconnect and isolate the battery negative cable.
2. Remove the trim cover from the driver side airbag. Driver Air Bag - Removal.
3. Remove the mounting fasteners.
4. Disconnect the electrical connector.
5. Remove horn switches by gently rocking the switch side to side while pulling outwards.