Totally Integrated Power Module (TIPM) - Removal

REMOVAL






NOTE: Left hand drive gasoline engine shown, left hand drive diesel similar. Right hand drive gasoline and diesel similar with the battery and related components packaged on the left side of the engine compartment.

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Release the Totally Integrated Power Module (TIPM) cover retaining clips (1) and open the TIPM cover.
4. Remove the TIPM positive cable retaining nut (2) and remove the cable (4) from the stud.





5. Depress the four mounting clips to disengage and remove the TIPM housing (1) from its mounting bracket (4).
6. Disconnect each of the seven TIPM wire harness connectors.
7. Remove the TIPM from the vehicle.