Second Row

REMOVAL

OUTBOARD SEATS





1. Remove child seat anchor bezel fasteners (1) and remove the bezel (2) from the seat back (3).





2. Remove seat back trim cover panel (1).





3. Release seat latches and rotate the seat forward.
4. Release the clips on the seat side trim panel covers (1) and remove from the panels from the seat.





5. Remove the two fasteners (3) from the lockout box (2) on the outboard side of the seat.
6. Release the headrest cable (1) from lockout box (2) and remove lockout box.





7. Remove the outboard seat back fastener (1) from the seat back (2).





8. Release all the seat cover tabs (1).





9. Position the seat cover and seat foam as necessary to access and remove the inboard seat back retainers (2).
10. Remove the seat back from the seat assembly.





11. Remove the headrest.Headrest - Removal
12. Cut the hog ring fasteners and remove the seat cover (1) from the seat back foam (2).





13. Remove the seat back foam (1) from the seat back frame (2).

CENTER SEAT





1. Remove second row seat assembly. Second Row Seat - Removal
2. Remove seat back trim cover panel (1) from the seat back (2).





3. Release seat latches and rotate the outboard seats forward.
4. Remove seat side trim panel cover fasteners (2), release the trim panel clips and remove the covers (1) from both sides of the center seat.

NOTE: Left side shown right side similar






5. Release the seat cover tab straps to access the right side seat back frame bolts.
6. Position the seat cover and seat foam as necessary and remove the two right side seat back frame bolts.





7. Remove the left side seat back frame fasteners and remove the center seat back from the seat assembly.





8. Remove the two armrest fasteners (1) on the back side of the seat back.
9. Pull the armrest away from the seat back releasing the retainer clips and remove the armrest from the center seat back.





10. Remove the pin type fastener (1) in the armrest opening of seat back.





11. Using a trim tool C-4755 or equivalent remove the seat belt trim bezel (2) from the seat back (1).
12. Carefully remove the seat back cover (1) from the seat back foam and pull the seat belt (3) through the opening in the seat back cover.





13. Remove the seat back foam (1) from the center seat back frame (2).