B1285

B1285-PARK ASSIST DISABLE SWITCH PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information.





CHECK FOR AN ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Press the Rear Park Assist Disable switch three times.
4. With the scan tool, read DTCs.

Does the scan tool display: B1285-PARK ASSIST DISABLE SWITCH PERFORMANCE?

Yes

- Replace the Upper Switch Bank.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.