B165E

B165E-PARK LAMP CONTROL CIRCUIT OPEN





For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the Park Lamps activated.

- Set Condition:
When the Front Control Module (FCM) detects a OPEN condition.





INTEGRATED POWER MODULE
1. Turn the ignition off.
2. Replace the Park Lamp relay with and known good relay.
3. Using the scan tool, clear all IPM DTCs.
4. Turn the Park Lamps ON then OFF.
5. Using the scan tool, read the DTCs.

Does the scan tool read: B165E-PARK LAMP CONTROL CIRCUIT OPEN?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test.