B1661

B1661-FRONT FOG LAMP CONTROL CIRCUIT OPEN





For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the Fog Lamps activated.

- Set Condition:
When the IPM detects an OPEN condition.





INTEGRATED POWER MODULE

NOTE: Prior to testing, check and inspect that all applicable fuses are functional and working properly.

1. Turn the ignition off.
2. Replace the Fog Lamp relay with and known good relay.
3. Using the scan tool, clear all IPM DTCs.
4. Turn the Fog Lamps ON then OFF.
5. Using the scan tool, read the DTCs.

Does the scan tool read: B1661-FRONT FOG LAMP CONTROL CIRCUIT OPEN?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test.