B1A79

B1A79- REMOTE START ANTENNA CIRCUIT OPEN OR NOT CONNECTED

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on. Remote start present and configured.

- Set Condition:
No Remote Start Antenna detected by the Wireless Ignition Node (WIN).





Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Wireless Ignition Node (WIN) Verification Test.
REMOTE START ANTENNA NOT CONNECTED
1. Verify that the Remote Start Antenna is connected to the WIN.

Is the Remote Start Antenna connected to the WIN?

Yes

- Replace the Remote Start Antenna.
- Perform the WIRELESS IGNITION NODE (WIN) VERIFICATION. Wireless Ignition Node (WIN) Verification Test.

No

- Reconnect the Remote Start Antenna and verify operation.
- Perform the WIRELESS IGNITION NODE (WIN) VERIFICATION. Wireless Ignition Node (WIN) Verification Test.