B2315

B2315-WIPER ON/OFF CONTROL CIRCUIT OPEN





For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
When the Front Control Module (FCM) detects a short/low condition.





INTEGRATED POWER MODULE
1. Turn the ignition off.
2. Replace the Wiper ON/OFF relay with a known good relay.
3. Using the scan tool, clear all FCM DTCs.
4. Turn the Wipers ON then OFF.
5. Using the scan tool, read the Wiper DTCs.

Does the scan tool read: B2315-WIPER ON/OFF CONTROL CIRCUIT OPEN?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test.