Heating & A/C System: 83

83-SENSOR FAILED OPEN DURING COOLDOWN TEST

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
When executing the Cooldown Test.

- Set Condition:
If the Evaporator Temperature Sensor input is out of range toward the high voltage threshold when executing the Cooldown Test.

NOTE: This DTC will display as active if the ignition is not cycled after running the Cooldown Test. Otherwise, it will display as stored until cleared.

Refer to 31-EVAPORATOR SENSOR OPEN for the diagnostic test procedure. 31