U1414

U1414-IMPLAUSIBLE/MISSING ECU CONFIGURATION DATA

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on. The ORC on board diagnostics continuously monitors the CAN Bus message from the FCM containing the ORC Configuration Data.

- Set Condition:
This DTC will set if the appropriate CAN Bus message is not received by the ORC.





Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Restraints System Pre-Diagnostic Procedure .
FRONT CONTROL MODULE FAILURE
1. Turn the ignition on.
2. With the scan tool, read FCM DTCs.

Does the scan tool display any Front Control Module DTCs?

Yes

- Diagnose and repair the DTC(s).

No

- Replace the Front Control Module.
- Perform the ORC VERIFICATION TEST. Occupant Restraint Controller (ORC) Verification Test.