Power Liftgate Link Rod - Installation

INSTALLATION





1. Install the drive unit end of the link rod (1) onto the mounting sphere by gently pushing straight on.
2. Install the liftgate end of the link rod (1) onto the liftgate (3) pivot bracket (2) by gently pushing straight on.





3. Push the plastic retainer (1) down to lock the link rod mounting sphere (2) into position for both ends of the link rod.
4. Install the D-pillar trim on the vehicle. D-Pillar Trim Panel - Installation for the procedure.
5. Perform the power liftgate learn cycle, Programming and Relearning.