Operation CHARM: Car repair manuals for everyone.
Home >> Jeep Truck >> 2010 >> Commander 4WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Solenoid >> Service and Repair >> Oil Intake Control Valve - Removal

Oil Intake Control Valve - Removal





REMOVAL





1. Remove intake manifold Intake Manifold - Removal.
2. Disconnect oil control valve electrical connector (2).
3. Remove oil control valve fastener (1).






NOTE: To remove the oil control valve, the engine must be at room temperature.

4. Rotate the oil control valve to break the seal. Pull the oil control valve out.
pro multis · About Operation CHARM