Power Seat Track - Removal

REMOVAL

NOTE: Take the proper precautions to protect the seat from cosmetic damage while performing this procedure.





1. Disconnect and isolate the negative battery cable.
2. Remove the front seat and place it on a workbench Front Seat - Removal.
3. Disconnect the wire harness connectors (1, 6 and 7) from the three power seat motors.
4. Remove the wire harness (5) from the power seat adjuster assembly (8).
5. Remove the four bolts (2) that secure the four seat cushion pan brackets (3) to the seat cushion pan (4) and remove the brackets.
6. Remove the seat cushion and pan from the power seat adjuster assembly.
7. Remove the seat cushion side shields and the seat back Seat Back - Removal.
8. Transfer any parts from power seat adjuster assembly as necessary.