Removal

REMOVAL










1. Raise vehicle.
2. Remove rear wheel and tire assembly.
3. Remove the 2 caliper bolts (4) then remove the caliper. Support the caliper, Do not let the caliper hang by the brake hose.










4. Remove rubber access plug (1) from back of rear disc brake support plate (3).
5. If necessary retract parking brake shoes with brake adjuster tool (2). Position tool at top of star wheel and rotate wheel.










6. Remove rotor from axle hub flange.





7. Remove the four axle flange nuts (1).





8. Remove the axle shaft (1) from the rear differential Removal.










9. Remove the shoe to shoe return spring (6) with needle nose pliers AND then remove the adjuster (5).
10. Remove the shoe to shoe return spring (3) with brake pliers.
11. Remove shoe hold-down clips (4) and pins. Clip is held in place by pin which fits in clip notch. To remove clip, first push clip ends together and slide clip until head of pin clears narrow part of notch. Then remove clip (4) and pin.
12. Remove shoes (1) off the actuator lever (2) for the park brake then remove the shoes (1).