U0415

U0415-IMPLAUSIBLE DATA RECEIVED FROM ABS



- When Monitored:
With the ignition on for Four seconds, no CAN BUS circuit error condition present, no lost communication with ABS condition present, and no system undervoltage or overvoltage condition present.

- Set Condition:
The Final Drive Control Module (FDCM) is receiving implausible data for vehicle speed, wheel speeds, brake switch status, longitudinal acceleration, yaw rate, or lateral acceleration from the ABS controller.





ABS DTCS PRESENT
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the Antilock Brake Controller.

Are there any DTCs present?

Yes

- Perform the appropriate diagnostic procedure Testing and Inspection

No

- Replace the Final Drive Control Module (FDCM).
- Perform TRANSFER CASE VERIFICATION TEST Transfer Case Verification Test.