Compass and Mini-Trip Computer Module

REMOTE COMPASS MODULE

The Remote Compass Module (RCM) data is transferred on the Controller Area Network (CAN) Data Bus circuit. The RCM and Electronic Vehicle Information Center (EVIC)/Compass Temperature Display will not function properly if the bus messages are not properly received. If no EVIC/Compass Temperature Display data is displayed, check the CAN Data Bus circuit communications, the RCM, the Instrument Cluster functions and the Totally Integrated Power Module (TIPM). Any diagnosis of the RCM and EVIC/Compass Temperature Display system should begin with the use of a scan tool and the appropriate diagnostic service information.

For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.