Front

INSTALLATION






WARNING: Before proceeding with the following repair procedure, review all warnings and cautions Service Precautions .

1. Install the seat cushion heating element (3), if equipped. Heater Pad - Installation
2. Install the seat cover to the seat cushion.
3. Install new front hog rings (1).
4. Install new side hog rings (2).





5. Wrap the cover (1) around the rear side facing and attach the hook and loop fasteners on the cover to the fastener that is molded into the side of the foam cushion (2) and seat fully.





6. Insert the cushion assembly (1) fully into the biteline (2) of the seat.

NOTE: It is important that the foam be fully seated on the frame so a leather bubble does not appear. Pull rearward on the wire embedded in the rear of the foam to assist in locating the foam correctly.

7. Connect the electrical connectors, if equipped.





8. Secure the front and back J-straps (1) fully.
9. Tuck the edges of the cover under the collar on the side shields in back.
10. Secure the side J-straps fully.
11. Install the seat side shields. Seat Cushion Side Shields - Installation