Seat - Removal

REMOVAL





1. Disconnect the negative battery cable.
2. Position the rear seats so that the seats are in a flat position.
3. Remove the load floor panel (1) from the load floor (2) and the rear seat bracket (3).





4. Remove the three seat bracket nuts.





5. Remove the four bolts from the cushion legs.






NOTE: Lift the bottom cushion and prop up to access the fasteners.

6. Remove the two seat bracket nuts (1) from the seat brackets.
7. Remove the center bracket bolts (4) and the center seat belt (2).
8. Remove the electrical connector (3) from the seat module.
9. Fold down the seat backs and remove from the vehicle.