Electronic Variable Brake Proportioning

ELECTRONIC VARIABLE BRAKE PROPORTIONING

Vehicles equipped with ABS use EVBP to balance front-to-rear braking. The EVBP is used in place of a rear brake proportioning valve. The EVBP system controls the slip of the rear wheels during braking at low to moderate deceleration, up until the point where ABS control is necessary. The brake pressure at the rear wheels is controlled by using the inlet and outlet valves located in the hydraulic control unit (HCU).

EVBP activation should not be perceptible by the customer because there is no pump motor noise and almost no brake pedal feedback.