Recirculation Door Actuator - Installation

INSTALLATION

NOTE: Illustrations shown with instrument panel removed for clarity.

NOTE: LHD model shown in illustrations. RHD model similar.





1. Install the recirculation door actuator (1) onto the HVAC air inlet housing (2). If necessary, rotate the actuator slightly to align the splines on the actuator output shaft (3) with those on the recirculation door pivot shaft adapter (4).





2. Install the screws (1) that secure the recirculation door actuator (2) to the air inlet housing (3). Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the wire harness connector (4) to the recirculation door actuator.
4. Install the glove box bin Instrument Panel Glove Box - Installation.
5. Install the silencer panel and two push-pins.
6. Reconnect the negative battery cable.