Canada - Recall - L09 Axle Fastener Torque
BulletinL09
Issue Date
2011-03-22
IMPORTANT
DEALER SERVICE INSTRUCTIONS
SAFETY RECALL L09 AXLE FASTENER TORQUE
MODELS:
2010 - 2011 (JK) Jeep(R) Wrangler
NOTE:
This recall applies only to the above vehicles built from July 07, 2010 through September 10, 2010 (MDH 070710 through 091023).
^ Select suspension fasteners on about 1,450 of the above vehicles may not have been tightened properly during the vehicle manufacturing process. Under certain driving conditions loose suspension fasteners could cause a crash without warning.
^ To correct this condition, Select suspension fasteners must be tightened to the correct torque specification.
Recall and Parts Information
Canadian Recall Service Instructions and Part Numbers can be different. Always use the attached Canadian Recall Notification for service instructions and parts information.
This Canadian Recall Notification can also be found in DealerCONNECT - See below:
DealerCONNECT > Service > In the Repair section TechCONNECT > 30 - CANADIAN RECALLS
The V.I.N. range for vehicles involved in this campaign is as follows:
1J4BA5H14AL193215 - 1J4BA5H11AL222427
1J4BA5H10BL500204 - 1J4BA5H10BL521859
DEALER VIN LISTS Located in DealerCONNECT - Global Recall System (GRS)
GRS has been developed to provide dealers with an up-to-date list of involved vehicles by recall number and by dealer code. Owners known to Chrysler are also listed. Involved vehicles will be removed from the GRS within several days of submitting repair claims.
To use the GRS in DealerCONNECT, you first need to click on the Service tab and then in the Repair section click on Global Recall System. Your dealer's VIN list for each Recall can be sorted by: Unsold Vehicles (at the time of Recall launch), Phone Number, City Name, Zip Code (Postal Code) or VIN.
Dealer Information
Owner Letter