Programming and Relearning

AUTOMATIC DOOR LOCK AND UNLOCK

The toggling of the automatic door lock (also known as rolling door locks) feature and the automatic door unlock (also known as unlock doors on exit) feature (between enabled and disabled) can be performed with the use of the scan tool or by the customer.

SCAN TOOL PROGRAMMING

When using the scan tool, select:
1. Theft Alarm
2. VTSS
3. Miscellaneous Functions
4. Select the desired function.

CUSTOMER PROGRAMMING

AUTOMATIC LOCK (ROLLING LOCKS)

1. Open the driver door, sit in the driver seat and close the driver door.
2. Turn the ignition switch to the ON position (without starting the vehicle) and then back to the OFF position. Repeat this cycle three additional times for a total of four ignition switch cycles.
3. Within 10 seconds of switching the ignition switch to the OFF position at the end of the fourth cycle in the above step, press the driver interior door lock switch in the LOCK direction to lock the doors.

NOTE: Steps 2 and 3 must be completed within 10 seconds.

4. A single chime will be heard to verify that the customer programmable toggle of the automatic door locks was successfully completed.

NOTE: When toggling the automatic door lock (rolling lock) feature, the toggle that occurs will depend upon the last state of the automatic door lock feature. If the automatic door lock feature was enabled, it will now be disabled; and, if it was disabled, it will now be enabled. There is no telltale to inform you of the current state of the automatic door lock feature. The vehicle must be driven with the doors unlocked to a speed above 24 kilometers per hour (15 miles per hour) to confirm whether or not the automatic door lock feature is now enabled.

AUTOMATIC UNLOCK (UNLOCK ON EXIT)

1. Open the driver door, sit in the driver seat and close the driver door.
2. Turn the ignition switch to the ON position (without starting the vehicle) and then back to the OFF position. Repeat this cycle three additional times for a total of four ignition switch cycles.
3. Within 10 seconds of switching the ignition switch to the OFF position at the end of the fourth cycle in the above step, press the driver interior door lock switch in the UNLOCK direction to unlock the doors.

NOTE: Steps 2 and 3 must be completed within 10 seconds.

4. A single chime will be heard to verify that the customer programmable toggle of the automatic door unlock was successfully completed.

NOTE: When toggling the automatic door unlock (unlock on exit) feature, the toggle that occurs will depend upon the last state of the automatic door unlock feature. If the automatic door unlock feature was enabled, it will now be disabled; and, if it was disabled, it will now be enabled. There is no telltale to inform you of the current state of the automatic door unlock feature. The vehicle must be driven with the doors unlocked to a speed above 24 kilometers per hour (15 miles per hour) to lock the doors, then be brought to a full stop and the driver door opened to confirm whether or not the automatic door unlock feature is now enabled.