Rear

INSTALLATION

1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions.
2. For appropriate seat configuration illustrations, Rear Seat - Description.

Two Door

1. Position the cover over the cushion and attach with new hog rings.
2. Position the seat back cushion over the seat back frame, zip the cover and fasten the J-straps.




3. Seat the headrest sleeves (1) into the seat back fully.
4. Install the seat back assembly onto the seat cushion assembly and install the cushion bolts.
5. Tighten the bolts to 50 Nm (37 ft. lbs.).

Four Door

1. Position the cover over the cushion and attach with new hog rings.
2. Position the seat back cushion over the seat back frame, zip the cover and fasten the J-straps.
3. Install the seat belt bezel.
4. Install the inner and outer latch covers.
5. Install the seat cushion assembly onto the seat back assembly and install the pivot bolts.
6. Tighten the bolts to 25 Nm (18.5 ft. lbs.)
7. Position the release handle back and install the screws.
8. Install the release handle bezel.
9. Position the seat halves back together.

Two and Four Door

1. Install the seat, Rear Seat - Installation.
2. Install the headrest, Headrest - Installation.