Install Roof Bow Shields

1. Lower the sun visors and swing visor out of the way.

2. Disengage the soft top header latches.

3. Partially lift the soft top.

4. Remove the left and right rear quarter windows.





5. Prop the top up halfway (Figure 18). Figure 18 - Prop Soft Top Up Halfway








6. Install the right and left number 3 roof bow shields (Figure 19 and 20).

7. Thread the tie strap through the holes in the roof bow shield and around the number 3 roof bow tube (Figure 20). Then connect the tie strap and tighten securely.

8. Cut the excess tie strap (tail) off and tuck the tie strap head up next to the roof bow shield.

NOTE:
Make sure the tie strap head is positioned correctly.





9. Install the right and left number 2 bow shield (Figure 21).

10. Thread the tie strap through the holes in the roof bow shield and around the number 2 roof bow tube. Then connect the tie strap and tighten securely.

11. Cut the excess tie strap (tail) off and tuck the tie strap head up next to the roof bow shield.

NOTE:
Make sure the tie strap head is positioned correctly.

12. With the help of an assistant, remove the prop rod and place the soft top into position.

13. Install the left and right quarter windows.

14. Engage the soft top header latches at the header panel.

15. Place sun visors back into position.

16. If removed, install the save rear window and tail bar as an assembly.