Brake Pedal Assy: Service and Repair
Removal1. Disconnect the stop lamp switch connector.
2. Remove the nut and washer from the pedal through pivot bolt.
3. Slide out the brake pedal through bolt.
4. Remove the brake pedal return spring from the brake pedal.
5. Remove the brake pedal.
6. Remove the brake pedal bushings from the brake pedal.
7. Remove the stopper rubber from the brake pedal.
Inspection
Stop light switch
1. Remove the stop light switch.
2. Connect an ohmmeter to the stop light switch, and check a continuity with depressing the brake pedal.
Replacement
1. Lubricate the brake pedal bushings and install them to the brake pedal.
2. Position the brake pedal and slide the brake pedal through bolt into place.
3. Install the nut and washer onto the brake pedal through bolt.
4. Install the brake pedal return spring.
5. Connect the stop lamp switch connector.