Brake Pedal-to-Floor Clearance

Inspection





1. Start the engine, and check that the clearance from a dash panel to a center of pedal pad upper side is in the specification when the pedal is depressed with 589 N (132 lbs., 60 kg).
Pedal-to-floor distance: 1.02 inch (26 mm)
2. If the clearance is less than the specification, the following points have to be tested.
1 Air insertion in the inside of brake system
2 Wearness of pads
3 Excessive clearance of shoe
4 Failed auto adjust
5 Leakage of master cylinder