Alarm Module: Service and Repair

REMOVAL AND INSTALLATION

1. Disconnect the negative battery terminal.




2. Open the glove box and remove the release checker to open fully.




3. Loosen the screw of the center console.




4. Remove the ashtray and loosen the screw to remove the center facia.




5. Loosen the screw of the panel and the center console.




6. Pull the panel to loosen the screw of the center console.




7. Remove the center console.




8. Loosen the bolts of the in panel member bracket.




9. Disconnect the connector.
10. Installation is the reverse of removal.