Seats: Service and Repair

Front Seat:

REMOVAL

1. Remove seat assembly from vehicle.




a. Remove two mounting bolts and two nut from under seat.
b. Disconnect electrical connector from bottom of seat.




2. Remove side garnish assembly.
a. Remove reclining knob.
b. Remove lumber support switch.
c. Remove slider & lifter knob.
d. Remove mounting screws from side of seat.

3. Remove arm rest.
a. Remove mounting screws from side of seat.

4. Remove arm rest.
a. Remove mounting bolt from arm rest.

5. Remove seat back.
a. Remove mounting bolts from side of seat.

6. Remove seat cushion
a. Remove mounting bolts from bottom of seat.

INSTALLATION

1. Install front seat in reverse order of removal.

Tightening torque: Seat mounting bolts and nut to 39 N.m (3.9 kg.m, 28 lb.ft)