Instrument Panel, Gauges and Warning Indicators: Service and Repair

Removal
1. Disconnect negative battery cable.
2. Remove driver air bag module.
3. Remove steering wheel, turn signal assembly, and upper/lower column covers.
4. Remove A-pillar upper trim.




5. Remove instrument cluster trim.
a. Remove two screws from instrument cluster trim.
b. Remove instrument cluster trim from mounting space.




6. Remove instrument cluster
a. Remove four screws from instrument cluster assembly.
b. Disconnect electrical connector from rear of unit.




7. Remove A-pillar lower trim.
a. Remove one fastener from A-pillar lower trim.
b. Unfasten A-pillar lower trim.




8. Remove lower LH panel.
a. Remove hood release handle.
b. Remove one fastener from bottom of panel.
c. Disconnect electrical connector from rear of panel.




9. Remove multi box.
a. Remove mounting screws from instrument panel.
b. Unfasten multi box




10. Remove audio panel.
a. Unfasten ashtray from audio panel.
b. Remove one screw from audio panel.
c. Disconnect electrical connector from rear of panel.




11. Remove ventilation control panel.
a. Remove four screws from ventilation control panel.
b. Disconnect electrical connector from rear of panel.




12. Remove audio.
a. Remove four screws from front of audio.
b. Remove audio from mounting space.
c. Disconnect electrical connector and antenna cable from rear of unit.




13. Remove glove box.
a. Open glove box.
b. Remove glove box stopper from lower RH panel.
c. Remove four mounting bolts from mounting bracket.




14. Remove center console.
a. Remove select lever boots
b. Remove five mounting screws.




15. Remove speaker and mounting bolts from top of instrument panel.
16. Remove side cover.
17. Remove mounting bolts from T-bar.
18. Remove mounting bolts from bottom of instrument panel.
19. Disconnect all connectors between the instrument panel and the vehicle bulkhead electrical wire harness.
20. Remove instrument panel.

Installation
Install instrument panel in reverse order of removal.