Alarm Module: Testing and Inspection
INSPECTIONWhile operating the components check whether the operations are normal with timing chart.
ETACS FUNCTION
1. Intermittent wiper
Time specification
T1: Max. 0.3 sec.
T2: 0.7 ± 0.1 sec. (Time of wiper motor 1 ratoon)
T3: (Intermittent time): T2 + FAST (2.0 ± 0.2 sec.) T2 + LOW (10 ± 1.0 sec.)
2. Washer related wiper.
Time specification.
T1: 0.6 ± 0.1 sec.
T2: 2.5 - 3.8 sec.
T3: 0.2 - 0.6 sec.
T4: 0.7 ± 0.1 sec.
This function should be operated preferentially even though the variable intermittent wiper is operating.
3. Rear window defogger and front windshield defogger.
Time specification
T1: 20 ± 1 min.
4. Seat belt warning
Time specification
T1: 6 ± 1.5 sec.
T2: 0.5 - 0.1 sec.
5. Ignition key hole illumination
Time specification
T1: 10 ± 1 sec.
T2: 0 - 10 sec.
6. Delayed out room lamp
Time specification
T1: 5 - 6 sec.
T2: 30 ± 3 sec.
T3: 20 ± 2 min.
7. Ignition key reminder
8. Battery saver.
9. Power window timer
Time specification
T1: 30 ± 3 sec.
10. Crash door unlock
Time specification
T1: 200 msec.
T2: 0.5 ± 0.1 sec.
T3: 60 ± 2 msec.
11. Door ajar
Alarm occurs while the door or tail gate opened when the vehicle speed is 5 km/h over.
12. Tail gate glass open
Time specification
T1: 3 ± 0.5 sec.
T2: 0.5 ± 0.1 sec.
13. Central door lock / unlock.
14. 2-Turn unlock
Time specification
T1: 3 ± 0.5 sec.
T2: 0.5 ± 0.1 sec.
15. Remote keyless Entry system.
1. Door lock
Time specification
T1: 1.0 sec.
2. Door unlock.
Time specification
T1: 0.5 sec.
3. Tail gate glass open
Time specification
T1: 0.5 sec.
4. Panic
Time specification
T1: 27 ± 2 sec.
T2: 0.5 ± 0.1 sec.
T3: 0.5 ± 0.1 sec.
T4: 2.7 ± 0.5 sec.
16. Code saving method
1. To store transmitter code, first apply the battery voltage to terminal "6" of DLC (Data Link Connector) and then operates as shown in the illustration.
NOTE: Do not disconnect the negative(-) battery terminal.
2. Remove the battery voltage and then check the operation of the keyless entry system.