Brake Pedal Assy: Service and Repair

BRAKE PEDAL





COMPONENTS

REMOVAL
1. Remove the stop lamp switch connector.





2. Remove the joint pin and snap pin.
3. Remove the nut and then remove the brake pedal.

INSPECTION
1. Check the bushing for wear.
2. Check the brake pedal for bending or twisting.
3. Check the brake pedal return spring for damage.
4. Check all parts for crack and wear.

INSTALLATION
1. Installation is the reverse of removal.
Nut tightening torque: 20 - 35 Nm (2.0 - 3.5 kg-m, 1 - 25 ft. lbs.)

CAUTION: Coat the inner surface of the bushings with the specified grease.

Specified grease: Chassis grease LiG-2





2. Before inserting the joint pin, apply the specified grease to the joint pin.