Rear Stabilizer Bar

REAR STABILIZER BAR

REMOVAL





1. Support the bottom of the rear differential carrier with a jack.





2. Remove the stabilizer link mounting nut.





3. Remove the stabilizer bar bushing bracket.

INSTALLATION





1. Align the identification mark white paint on stabilizer bar with bushing and install the stabilizer bar bushing bracket.
Tightening torque: 19 - 23 Nm (1.9 - 2.3 kg-m, 13 - 16 ft. lbs.)





2. Install the joint cup and nut and then tighten to the specified length.