Low Reverse Brake

LOW REVERSE BRAKE





COMPONENTS

DISASSEMBLY





1. Remove the bearing and the race.





2. Remove the snap ring and the piston return spring.





3. Apply the compressed air to the transmission case to remove the No. 2 first reverse brake piston.





4. Remove the second brake from the output shaft.





5. Remove the discs (6EA), plates (6EA) and flange.

INSPECTION





1. Using a micrometer, measure the thickness of the discs. If the thickness is less than the minimum, replace the disc.
Minimum thickness: 1.51 mm (0.059 inch)

REASSEMBLY





1. Make sure the first and reverse brake piston moves smoothly when applying and releasing the compressed air into the transmission case.