Engine Mechanical Specs

ENGINE MECHANICAL SYSTEM
GENERAL
SPECIFICATIONS
General
Type DOHC V-type
Number of cylinders 6
Bore 93 mm (3.66 inch)
Stroke 85.8 mm (3.38 inch)
Total displacement 3497 cc (213.3 cu.in)
Compression ratio 10.0
Firing order 1-2-3-4-5-6
Valve timing
Intake valve
Opens (BTDC) 16.5°
Close (ABDC) 55.5°
Exhaust valve
Opens (BBDC) 48.5°
Close (ATDC) 15.5°
Camshaft
Cam height
Intake 35.098 - 35.298 mm (1.38 - 1.39 inch)
Exhaust 34.81 - 35.01 mm (11.37 - 1.38 inch)
Journal O.D. 25.951 - 25.970 mm (1.02 - 1.022 inch)
End play 0.1 - 0.2 mm (0.0039 - 0.0079 inch)
Oil filter type Cartridge, Full flow
Engine oil quantity 4.3liters (4.51 US.qts, 3.78 imp.qts)
Cooling method Engine coolant cooling, forced circulation with electric fan
Cooling system quantity 8.2 liters (8.61 US.qts, 7.2 imp.qts)
Air cleaner
Type Dry type
Element Unwoven cloth type
Exhaust pipe
Muffler Expansion resonance type
Suspension system Rubber hanger


TIGHTENING TORQUE
Oil screen bolt 15-22 Nm (150-220 kgf-cm, 11-15 ft. lbs.)
Oil relief valve plug 40-50 Nm (400-500 kgf-cm, 29-36 ft. lbs.)
Oil pressure switch 8-12 Nm (80-120 kgf-cm, 5.8-8.7 ft. lbs.)
Oil filter 11.8-15.7 Nm (120-160 kgf-cm, 8.7-11.6 ft. lbs.)
Air cleaner body installation bolt 8-12 Nm (80-120 kgf-cm, 6-9 ft. lbs.)
Surge tank stay 15-20 Nm (150-200 kgf-cm, 11-14 ft. lbs.)
Oil level gauge guide to engine 12-15 Nm (120- 150 9-11 ft. lbs.)
Water outlet fitting bolt 17-20 Nm (170-200 12.3- 14.5 ft. lbs.)
Power steering oil pump bracket to front cylinder head assembly 17-26 Nm (170-260 12-19 ft. lbs.)
Power steering oil pump to bracket 17-26 Nm (170-260 12-19 ft. lbs.)
Crank position sensor wheel screw 5-6 Nm (50-60 4-5 ft. lbs.)
Starter to engine bolt 27-34 Nm (270-340 20-25 ft. lbs.)
Transaxle mounting plate 10-12 Nm (100-120 kgf-cm, 7-9 ft. lbs.)
Rear plate 10-12 Nm (100-120 kgf-cm, 7.3-8.6 ft. lbs.)
Oil seal case 10-12 Nm (100-120 kgf-cm, 7.3-8.6 ft. lbs.)
Engine hanger bracket to engine 27-35 Nm (270-350 kgf-cm, 20-25 ft. lbs.)
Generator mount bracket to engine 20-30 Nm (200-300 kgf-cm, 14-22 ft. lbs.)
Generator mount nut (Engine front case side) 20-30 Nm (200-300 kgf-cm, 14-22 ft. lbs.)
Generator mount bolt (Generator mount bracket side) 20-30 Nm (200-300 kgf-cm, 14-22 ft. lbs.)
Starter to engine (Nut) 20-30 Nm (200-300 kgf-cm, 14-2 ft. lbs.)
Drive belt pulley bolt 35-55 Nm (350-550 kgf-cm, 26-40 ft. lbs.)
Drive belt tensioner nut 45-50 Nm (450-500 kgf-cm, 33-36 ft. lbs.)
Engine coolant temperature sensor 20-40 Nm (200-400 kgf-cm, 14-29 ft. lbs.)
Engine coolant inlet fitting attaching bolt 17-20 Nm (170-200 kgf-cm, 12-14 ft. lbs.)
Air cleaner mounting bolts 8-12 Nm (80-120 kgf-cm, 6-9 ft. lbs.)
Front exhaust pipe to catalytic converter bolts 40-60 Nm (400-600 kgf-cm, 29-43 ft. lbs.)
Catalytic converter to center exhaust pipe nuts 30-40 Nm (300-400 kgf-cm, 22-29 ft. lbs.)
Center exhaust pipe to main muffler nuts 30-40 Nm (300-400 kgf-cm, 22-29 ft. lbs.)
Main muffler hanger support bracket bolts 10-15 Nm (100-150 kgf-cm, 7-11 ft. lbs.)
Delivery pipe installation bolts 10-15 Nm (100-150 kgf-cm, 7-11 ft. lbs.)
Starter to engine (Bolt) 27-34 Nm (270-340 kgf-cm, 20-25 ft. lbs.)