Secondary Seat

SEAT BACK COVER REPLACEMENT
1. Remove the recliner cover.




2. Remove the cover (A).
3. After the armrest mounting bolt, then remove the armrest (B).




4. Remove the seat back panel (A).




5. Remove the hog-ring clips (A).
6. Remove the headrest and headrest guide.




7. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).
8. Installation is the reverse of removal.






NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hog-ring clips (B)
- Replace the hog-ring clips with new ones using special tool (C).