Component Tests and General Diagnostics

INSPECTION




1. The body network system consists of several ECUs that communicates via a CAN bus. The diagnostic tester is not directly connected to the CAN bus, but utilises a one-wire communication line (K-line) that connects to a gateway in the IPM ECU.

2. The IPM communicates with the diagnostic tester directly. But other units operate self diagnostic, input/output monitoring and actuator operation via the IPM using the CAN communication.

IPM (In-Panel Module) Part 1:

IPM (In-Panel Module) Part 2:

INPUT MONITORING

FAM (Front Area Module):

FAM (FRONT AREA MODULE)

RAM (Rear Area Module):

RAM (REAR AREA MODULE)

DOM (Driver Door Module):

DDM (DRIVER DOOR MODULE)

ADM (Assist Door Module):

ADM (ASSIST DOOR MODULE)

IMS Module:

IMS MODULE

DRIVING ACTUATOR

IPM Actuator List:

IPM ACTUATOR LIST

FAM Actuator List Part 1:

FAM Actuator List Part 2:

FAM ACTUATOR LIST

RAM Actuator List Part 1:

RAM Actuator List Part 2:

RAM ACTUATOR LIST

DOM Actuator List:

DDM ACTUATOR LIST

ADM Actuator List Part 1:

ADM Actuator List Part 2:

ADM ACTUATOR LIST

IMS Actuator List:

IMS ACTUATOR LIST