Body - Tailgate (PTG) Pinch Strip

Model Sedona[VQ]

Group General Information(10)

Number KT2006092104

Date Thursday, September 21, 2006

Area N. America

Subject
SC066: 2006 Sedona Power Tailgate (PTG) Pinch Strip Replacement Clarification: 3M Primer 94 Procedure/Sourcing/Alternatives

- Description

Campaign SC066: 2006 Sedona Power Tailgate (PTG) Pinch Strip Replacement utilizes 3M Primer 94 Adhesion Promoter during the reattachment procedure. Some dealers have reported difficulty in obtaining the adhesion promoter, either because they could not reach the company directly or because there were questions raised about the shipment of hazardous materials. KMA offers the following clarifications:

In addition to the phone number in the TSB, a list of RSHughes distribution centers can be found at www.rshughes.com under warehouse locations and hours (located on the top left of he homepage).

The MSDS for 3M Primer 94 / 3M Part Number 70-0160-5478-8 data causes smaller quantities of the product to be classified so that the 0.5 Liquid Pint can be shipped ground as a consumer commodity on most domestic carriers.

Should you desire additional information about shipping or handling, see following:

3M Primer 94 Shipping and Handling Information

1. Contact 3M MSDS Customer Service.

2. Provide 3M Part Number: 70-0160-5478-8.

3. Provide your zip code.

4. The Customer Representative will connect you to a Transportation specialist.

United Parcel Service (UPS)

United Parcel Service (UPS) will ship Consumer Commodities with no HAZMAT Fees on ground shipments only, providing the shipping container is properly identified.

Call UPS Transportation for more Information.

Alternative Product:

If the 0.5 liquid pint of 3M Primer 94 is not readily available in your area, an alternative procedure is to locally source 3M(R) Automotive Adhesion Promoter #06396. The 3M Automotive Adhesion Promoter #06396 are packaged as individual application swabs, sold in quantity of twenty-five. See photo below.

The Service procedure of SC066 will require two (2) 3M Automotive Adhesion Promoter #06396 application swabs per vehicle. Follow the steps below to locate a vendor in your area and to order:

3M Automotive Adhesion Promoter #06396 Locator Procedure

1. Contact 3M Customer Service/ Hours of operation: Monday Friday 7:00 a.m. - 6:00 p.m. (Central Time)

2. Provide 3M Automotive Adhesion Promoter Part #06396.

3. Provide your zip code. The Customer Representative will provide you a phone number of the vendor(s) that provide 3M products in your area. Body and paint supply stores will have the highest probability of stocking 3M Automotive Adhesion Promoter # 06396.





NOTE
When using the individual swabs with the adhesion promoter, open packets only when ready for immediate application.