Campaign SC063 - Power Sliding Door Switch Replacement

Model: Sedona [VQ]

Group: Body (Interior and Exterior)(91)

Number: KT2006082904

Date: Friday, September 08, 2006

Area: N. America

Subject
Service Campaign: 2006 Sedona EX Vehicles
With Power Sliding Doors (SC063)

Description

This service bulletin provides information related to the right and left power sliding door switches. Some 2006 Sedona vehicles produced from 2/17/06 5/8/06, equipped with power sliding doors may experience the power sliding door switch sticking in the depressed position, especially in higher temperatures. This may cause parts of the switch to expand and not leave sufficient clearance for the switch to return to the normal rest position.





Kia is replacing both the left and right power door switches on all affected vehicles within the specified production range.

Vehicles Affected





2006 Sedona EX models with power sliding doors produced between 2/17/06~5/8/06.





Parts Information

Note:
The part number listed will include 2 switch assemblies for both the left and right sliding doors.

Service Procedure

INSPECTION PROCEDURE:





1. Open hood and check for 5C063 Campaign Completion Label on the left side fender.

^ If label exists, Campaign 5C063 has been completed - NO FURTHER ACTION IS REQUIRED.

^ If Campaign SC063 label DOES NOT EXIST, continue on to the Repair Procedure.

Note:
Campaign completion must be verified on the Warranty Coverage Validation Inquiry screen, prior to performing repairs (Kia Standard System [KSS] Main Menu-Option 3).

REPAIR PROCEDURE:

(LEFT AND RIGHT SIDES):

1. Turn the power button OFF on the overhead console. Operate the left or right power sliding door switch to confirm door
does not operate.





2. Use a shop rag to protect the B-pillar trim during removal process.

^ Gently pry on the underside of the switch to remove from trim panel, as shown.

^ Disconnect the electrical connector from the switch assembly and discard old switch.





3. Connect the electrical connector to the new switch assembly.

^ Snap the switch into the B-pillar trim assembly.





4. Turn the power sliding door main switch to the ON position and test each sliding door to verify correct operation.





5. Install 5C063 Campaign Completion Label on the left side fender panel.

Operation Code And Time

WARRANTY CLAIM INFORMATION:





To improve customer satisfaction always remember to refer to the Warranty Coverage Validations Inquiry Screen (Select 3) on your Kia Standard System (KSS) Dealer Main Menu for a list of any additional campaigns that may need to be performed on the vehicle before returning it to the customer.