Sunroof / Moonroof: Testing and Inspection
INSPECTION1. Apply the battery voltage to terminal 3, 4 and ground the terminal 5.
2. Apply the battery voltage.to terminals as shown in table, and check that the sunroof unit operates as shown in table.
RESETTING THE SUNROOF
When your battery happens to be disconnected or discharged, or you use the emergency handle to operate the sunroof, you have to reset your sunroof system as follows
1. Turn the ignition key to the ON position.
2. In tilt-up position, press the tilt up switch more than 10 seconds, and let it memorize the initial value of the motor.
3. In above state, press the tilt up switch once again, and hold on until the sun roof system is reset completely by automatically performing the following: Tilt down -> Slide open -> Slide close.