General Information
Component Location
General Description
RAM is a component of BCM that consists of DDM, ADM, IPM, FAM, IMS and cluster module. Each part of BCM is connected to one another through CAN communication line for efficient communication. Those modules control front/rear, driver/passenger seat, cluster with electrical signal and they share information with other modules. RAM (Rear Area Module)set up at rear-left of passenger room controls various rear lamps (tail lamp, rear turn signal lamp, backup lamp, stop lamp, cabin lamp), window (sliding door power window, quarter glass, rear defogger), rear wiper and oil cap door.
DTC Description
B1627 is set when internal data error is detected in RAM EEPROM.
DTC Detecting Condition
Schematic Diagram