General Information

Component Location





General Description

Power sliding door (hereinafter PSD) is the system which moves sliding door of vehicle by electronic motor so that user can open or close door with less force than required on manual operation. PSD consists of drive unit, center roller/rail, handle and various kinds of switch (anti pinch, detent, latch), anti pinch switch is secondary protection equipment that prevents nipping in the door and has steel point of contact in rubber strip. When an obstacle has been detected during a power closing operation, the PSD shall reverse direction and move to the full open position (When an obstacle is detected during a power opening operation, the PSD shall stop)

DTC Description

The ECM sets DTC B2425 if there's open or short to battery in anti pinch sensor signal harness.

DTC Detecting Condition





Schematic Diagram