W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage.
3. Has a problem been found ?
YES
1) Repair as necessary and go to "Verification Vehicle Repair" procedure
NO
1) Go to "Power Supply Circuit Inspection" procedure

Power Supply Circuit Inspection

Motor Power circuit Inspection
1. Ignition "OFF"
2. Disconnect outside mirror switch and front powerseat switch
3. Measure resistance between terminal "1" of ADM and chassis ground
A. Specification : Approx. Infinity Ohms




4. Is the measured resistance within specifications ?
YES
1) Go to "Component Inspection" procedure.
NO
1) Check for short in power harness. Repair as necessary and go to "Verification of Vehicle Repair" procedure.