General Information

Component Location





General Description

FAM is a part of BCM with DDM, ADM, IPM, RAM, IMS and Cluster module. Each part of BCM is connected to one another through CAN communication line for efficient communication. Those modules control front/rear, driver/passenger seat, cluster with electrical signal and they share information with other modules. FAM (Front Area Module)set up at engine room controls various lamps (fog lamp, head lamp,stop lamp, turn signal lamp), wiper and performs system error checking as well. Received multi function switch head lamp signal from IPM through CAN line, FAM controls head lamp with integrated IPS. IPS is a semi-conductor element which performs roles of fuse and relay. In addition to those roles, it performs sensing circuit error, circuit protection.

DTC Description

The ECM sets DTC B2537 if open in Right turn signal lamp circuit is detected.

DTC Detecting Condition





Schematic Diagram