Operation CHARM: Car repair manuals for everyone.

Component Inspection





Component Inspection

1. Ignition "OFF".
2. Engine "ON".
3. Does warning lamp remain ON ?
YES
1) Substitute with a known-good HECU and check for proper operation. If problem is corrected, replace HECU and then go to "Verification of Vehicle Repair" procedure.
NO
1) Fault is intermittent caused by poor connection in power harness (IGN+). Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair as necessary and then go to "Verification of vehicle Repair" procedure.