Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to DLC (Data Link Connector)
2. Warm-up the engine to normal operating temperature.
3. Monitor "Actual Torque & Torque Request" parameters on scantool
4. Monitor DTC related to "ETS or CAM" on scantool




5. Are there any DTC related to "ETS" or "CAM" on the scantool ?
YES
1) Repair "ETS" or "CAM" system first, then, Go to W/Harness Inspection - "Terminal and connector inspection" procedure.
NO
1) Go to W/Harness Inspection - "Terminal and connector inspection" procedure.