System Specifications: Specifications
General Specifications
Engine Torque Specifications Sheets
Cylinder Head Torque and Sequence
1st step 37.3 - 41.2 Nm (3.8 - 4.2kgf.m, 27.5 - 30.4 ft. lbs.)
2nd step 120° ± 2°
3rd step 90° ± 2°
Bolt Reusability
Always use NEW cylinder head bolts.
Surface Variation
Cylinder Head
Flatness of Gasket Surface Less than 0.05 mm (0.0019 in.)
[Less than 0.02mm (0.0008 in.)/150 x 150]
Flatness of Manifold Mounting
Intake Less than 0.1 mm (0.0039 in.)
[Less than 0.03mm (0.001 in.)/110 x 110]
Exhaust Less than 0.1 mm (0.0039 in.)
[Less than 0.03mm (0.001 in.)/110 x 110]
Intake Manifold Torque and Sequence
1st step 3.9 - 5.9 Nm (0.4 - 0.6 kgf.m, 2.9 - 4.3 ft. lbs.)
2nd step 18.62 - 23.52 Nm (1.9 - 2.4 kgf.m, 13.74 - 17.36 ft. lbs.)
3rd step Repeat 2nd step twice or more
Camshaft Bearing Cap Torque and Sequence
Step 1 5.9 Nm (0.6 kgf.m, 4.3 ft. lbs.)
Step 2 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
Main Bearing Cap Torque and Sequence
Main Bearing Cap Inner Bolt (M11) 49 Nm +90 ° (5 kgf.m + 90°/36.16 ft. lbs. + 90°)
Main Bearing Cap Outer Bolt (M8) 19.6 Nm + 120° (2.0 kgf.m + 120°/14.46 ft. lbs. + 120°)
Main Bearing Cap Side Bolt (M8) 29.40 - 31.36 Nm (3.0 - 3.2 kgf.m/21.70 - 23.14 ft. lbs.)
Connecting Rod Bearing Cap Torque
Bearing Cap 19.6 Nm + 90° (2.0 kgf.m + 90°/14.46 ft. lbs. + 90°)
Crankshaft Pulley Torque
Crankshaft Pulley Bolt 284.2 - 303.8 Nm (29 - 31 kgf.m/209.76 - 224.22 ft. lbs.)
Flex Plate Torque and Sequence
Drive Plate Bolt Cap 71.54 - 75.46 Nm (7.3 - 7.7 kgf.m/52.80 - 55.69 ft. lbs.)
Oil Pump Torque and Sequence
Oil Pump Bolt 19.6 - 23.5 Nm (2.0 - 2.4 kgf.m/14.5 - 17.4 ft. lbs.)
Exhaust Manifold Torque and Sequence
Torque 39.2 - 44.1 Nm (4.0 - 4.5 kgf.m, 28.92 - 32.53 ft. lbs.)
Water Pump Torque and Sequence
Water pump with 12 bolts
Water Pump Bolts 21.56 - 23.52 Nm (2.2 - 2.4 kgf.m, 15.91 - 17.36 ft. lbs.)
9.80 - 11.7 6 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
Water Pump With 4 Bolts
Water Pump Bolts 7.84 - 9.80 Nm (0.8 - 1.0 kgf.m, 5.78 - 7.23 ft. lbs.)