Rear Axle
REAR AXLESERVICE INSPECTION PROCEDURE
AXLE SHAFT END PLAY CHECK
1. Measure the axle shaft end play using a dial indicator
Standard value: 0 - 0.05 mm (0 - 0.002 inch)
2. If the axle shaft end play exceeds the standard value, replace the bearing with a new one.
GEAR OIL LEVEL CHECK
1. Remove the filler plug and check the quantity of oil in the differential carrier.
2. It is enough if oil is applied until the filler plug.
Specified gear oil:
Hipoid gear oil
Conventional differential
SAE90, API GL-5
With Limited Slip Differential
SAE85W90, API GL-5
SPECIFIED GEAR OIL QUANTITY: 1.6 Liter