Radio/Stereo: Service and Repair

AUDIO UNIT

REMOVAL
1. Disconnect the negative (-) battery terminal.




2. Remove the center facia lower panel (A) after pulling it by using regular screw driver (-) at part (A). Take care of fixing clips (B).




3. Remove the center facia panel (A) after loosening the screws. Avoid damaging retaining clips.




4. Remove the connectors of center facia panel.




5. Remove the mounting screws then remove the center air vent (A).




6. Remove the mounting screws then remove the audio unit (A).




7. Remove the audio unit after disconnecting the audio connectors and cable.

INSTALLATION
1. Connect the audio connectors and cable to the audio unit.
2. Fasten the audio mounting screws.
3. Reassemble the center air vent (A).
4. Reassemble the center facia panel after connecting the connectors.
5. Reassemble the center facia lower panel.
6. Connect the negative (-) battery terminal and then check the audio working.